Monitoring Systems

Kill A WATT™
Watts killing you?  Find out with a P4400 Kill A Watt unit today
A large LCD screen displays cumulative kilowatt-hours while monitoring, volts, amps, watts,
Hz, VA forecast your costs with 0.2% accuracy. Connect your appliances into the Kill A
Watt™ unit and assess how efficient they are. The LCD display counts consumption by the
Kilowatt-hour just like utility companies. You can figure out your electrical expenses
by the hour, day, week, month, even an entire year. Monitor the quality of your
power by displaying Voltage, Line Frequency, and Power Factor.

Model - P4400   Operating Voltage - 115 VAC   Max Volts - 125 VAC

Max Current - 15 Amps   Max Power - 1875 VA   Weight - 5 oz

Dimensions 5-1/8" x 1-5/8" x 2-3/8"
 
Price $39.95
 

The Power-Save 1200

 

The Problem: Your Home Wastes Power

American and Canadian homes all have the same problem. They inefficiently handle inductive load. Inductive load is anything in the home that runs by motor including refrigerators, freezers, air conditioners, heat pumps, washers, dryers, fans, blower motors, pool pumps, dish washers, vacuum cleaners and hair dryers. You get the picture, right?

All motors require a certain amount of reactive power (non-working power) from the utility to create the Electro-Magnetic-Field (EMF) around the motor to make it work.

The problem is that the local utility delivers that reactive power to homes without knowing how much they really need. The inductive load (motors) then uses what it needs and sends the rest back to your electric panel where it is "lost" - dispersed in heat never to be seen again. This loss is called I2R loss or "line loss". The problem with this equation is that the lost electricity ends up being paid for, because it has traveled thru the meter and been measured.


The Solution: The Power-Save 1200

The Power-Save 1200 unit stores and recycles the reactive power (non-working power) otherwise lost to "line loss". This allows the inductive motor load to push in and pull from the Power Save 1200 using the stored power, instead of asking for more from the utility. This process decreases demand from the utility, thereby decreasing Kwh usage and lowering the homeowners' electric bill.



 
 



Frequently Asked Questions

How Does the Power-Save 1200™ Unit Work?
The Power-Save 1200™ Unit reduces the amount of power drawn from the utility by storing (in its capacitors) otherwise lost electricity (watts) caused by the inductive motors in your home. (Some examples of inductive motors are Air Conditioning units, refrigerators, freezers, washers, dryers, dishwashers, pool pumps, vacuum cleaners, furnace blower motors, fans etc.) The technology applied by the Power-Save 1200™ Unit supplies that stored electricity back to your inductive loads, thus causing you to decrease your demand from the utility. If you decrease your demand from the utility, your meter slows down, and you use less electricity. The thought is, you’ve already paid for that electricity, why pay for it and waste it when you can pay for it, store it, and reuse it again. This whole process is called power factor optimization.

What is Power Factor?
Power factor is the percentage of electricity that’s delivered to your house and used effectively, compared to what is wasted. For example, a 1.0 power factor means that all the electricity that’s being delivered to your home is being used effectively for its purpose. However, most homes in North America today have a .77 power factor or less. This means that 77% of the electricity that is coming thru your meter at your home or business is being used effectively, the other 23% is being wasted by your inductive load. With a low power factor, the utility has to deliver more electricity to do the same work. However, the Power-Save 1200™ increases that power factor in most cases to .97 or .98, thus increasing the effective use of your electricity and lowering your usage.

Does the Power-Save 1200™ work in any home?
Yes it does, as long as you have a circuit breaker panel with breaker switches and not the old screw in type fuses, the unit will work on any single-phase electric application for homes.
 

Do you have a 3-phase Power-Save 1200™ for businesses available yet?
Our 3-phase unit is at UL labs being tested for certification. Check back with us soon for availability.
 

Will the Power-Save 1200™ affect any of my appliances and their normal use?
No, if anything, your motors will run about 10% cooler, which is good for a motor because heat is the enemy of a motor.

Is the Power-Save 1200™ tested and approved by independent labs?
Yes, the Power-Save 1200™ is UL listed and tested, and has also been tested by the University of Santa Clara California’s Electrical Engineering department, of which the results of that test are available on our website. Also, the technology is recognized by the U.S. Department of Energy.


How much can I expect to save per month by using the Power-Save 1200™?
That depends on many factors. The size of your home, the amount of inductive motor load, and the amount you are paying per kilowatt-hour for electricity etc. However, generally speaking users of the product have seen up to 25% in reduced consumption, but the average savings is somewhere in the 15% to 20% range.

How long will it take for the Power-Save 1200™ to pay for itself?
Generally about 6-12 months, but again, the same factors above apply, some will see sooner (6 months), some will see later (12 months).


Is the Power-Save 1200™ easy to Install?
Yes, it installs in about 20-30 minutes.

How long will the Power-Save 1200™ last?
It has a predicted lifespan of up to 20 years.
 


Why haven’t I heard of this product until now?
That’s easy, two words “cost effectiveness”. Up until recently, electric rates throughout America were cheap, costing us 2, 3 or 4 cents per kilowatt-hour. Now, electric rates are 8, 10, 12, 14, and 19 and in some cases New York City is 22 cents per Kwh, and Hawaii is 33.5 cents per Kwh. At the cheaper rates the Power-Save 1200™ didn’t make sense, but at the current rates, it makes all the sense in the world.



What About Power-Save 1200™ Surge Protection?
The Power-Save 1200™ also protects the entire home against power surges. No longer a need for so many surge protectors in the home. The unit provides a broad range of protection for hardwired appliances and most home electronics such as televisions, satellite equipment, entertainment systems, etc. The unit protects from power line surges as well as spikes caused by internal wiring problems, loose connections and fluctuating demand from large motors such as appliances, vacuum cleaners, heating and cooling equipment, etc.

Is the Power-Save 1200™ Unit Warranted?
Yes, 5 year Manufacturers Warranty for full replacement. See our website for full details.

Price: $299.95 plus Shipping, Handling and Installation (Call 608.604.2341for details)

Is there a “Money Back Guarantee”?
Yes, 60-day money back guarantee. If in 60 days, you don’t see reduction in usage on your electric bill, call us and let us know, and we’ll give you details on how to return the unit for a full refund of the purchase price. Installation cost will not be refunded.
 

 
 
 
 
 
 
 
 
 
 
 
 
 

Catalog Index